Catalog
Yamaha model A display replacement for ebikes from 2019. 1.7" LCD screen, cable 85cm.
Compatible with PW-SE, PW-TE and PW-X systems from 2019 with CanBus technology.
NOT compatible with only "PW" (without suffix) motors.
Brose planetary gear assy replacement, that include the 3 nylon gears, central spindle and asociated bearings, like in the photo. Valid for both aluminiun and magnesium model. Remember use Molykote plastic grease for this plastic gears. Good condition parts extracted from used motor.
Bosch Kiox an Nyon remote control protector made of transparent rubber (TPU). It protects all the top and lateral parts of the Bosch control unit against scratches, dirt, rain,... allowing the normal use of the buttons.
Bosch Intuvia remote control protector made of transparent rubber (TPU). It protects all the top and lateral parts of the Bosch control unit against scratches, dirt, rain,... allowing the normal use of the buttons.
New mount base for Bosch Kiox display. This bracket is attached to the center of the handlebar and allows it to be positioned at any height and angle. In this way, the Kiox screen is safer against falls and shocks, and with perfect visibility.
Remote control for Smart System display for Bosch ebikes. Valid when you've broken your current Bosch remote control and you need an original Bosch replacement.
LED Remote base for the Bosch Smart System. This base let you atach your remote control to the handlebar. Available in 2 option, "normal" and "high" (2,8mm higher than normal in case the remote touch the shifter or brake lever).
New mount base for Bosch Kiox300 display for the Bosch Smart System. This bracket is attached to the center of the handlebar and allows it to be positioned at any height and angle. In this way, the Kiox 300 screen is safer against falls and shocks, and with perfect visibility.
Select the handlebar diameter.
Lola chainring for Bosch Gen3 ebike motors. Made of steel and available in 38T, 40T and 42T. Only compatible with 3rd generation Bosch motors.
This SRAM EX1 cranks are light, durable, stiff to work under the hard eMTB conditions. The SRAM EX1 cranks are compatible with 2nd and 4th generation Bosch motors, and others that use the ISIS standard (some Yamaha for example). 170mm.
The KMC e8 EPT chain has been designed for central motor ebikes. This chain has maximum durability and superior anti rust protection. 122 links. For 8 speeds transmisions (1/2"x3/32").
Yamaha white plastic gear assembly for PW, PW-SE, ST, TE, CE and PW-X, X2, X3 ebike motors. Includes the white nylon gear, the center steel spindle, bearing and clutch, all ready to be mounted.
IMPORTANT: we have 4 different models, so look the photos carefully to see whats your model. Detailed description below.
Main steel drive gear for Yamaha PW ebike motors, including Yamaha PW Series 1, 2, 3, PW-SE, PW-ST, PW-TE, PW-CE and the Giant equivalents. This is a genuine Yamaha part. It is the steel drive gear that supports the front chainring spider. This part can often be damaged by tightening or removing the 36mm spider nut. The gear comes with new bearing, crankshaft seal and freewheel pawls fitted.
Muc-Off HCB-1 is the ultimate corrosion protection spray for your ride and is effective even in the harshest of conditions. Suitable for bicycles, e-bikes, motorcycles and powersports. HCB-1 is safe to use on electrical components, paintwork and most rigid plastic trim. Dissolves existing rust and creates a self-healing barrier, active for up to 12 months.
The Sunrace 11 speed chain is a narrow 11s chain for MTB ebikes. The Sunrace ebike chain has reinforced plates and pins. Teflon Coating Inner Plates. 138 links enough for bigger cassettes like 10-50. Instalation without tools. Compatible with Shimano, SRAM and Sunrace cassettes.
Special chainring for bicycles with Bosch 2 electric motor that need a 2.5mm offset chainring, for example, most boost bikes. One piece chainring made by FSA in steel.
This FSA cranks are made to be highly resistant to fatigue and high impact tensions. Compatible with ebikes with squared spindle like some Yamaha, Panasonic, Bafang.... 170mm length, 5mm offset.
Shimano EP8 ebike motor bearings to repair any Shimano EP8 electric motor. See the photos to see the bearings included in the Shimano EP8 kit.
Mahle 1.1 ebike motor bearings to repair any Mahle 1.1 electric motor. See the photos to see the bearings included in the Mahle 1.1 kit. In the "Bearing" field select "Full kit" to buy all the bearings and seals, or select the needed bearing reference.
Crankshaft for Brose motors (C, S, T and S-Mag). If the shaft of your Brose motor is already very worn in the area of the needle bearing, it has been bent or damaged for some reason, it is time to change it for a new one.
Samox direct mount chainring for Bosch Gen4 ebike motors. Made of aluminium and available in 32T, 34T, 36T and 38T. Only compatible with 4rd generation Bosch motors (BDU4). Narrow-Wide teeth system to avoid chain drop out.
Samox direct mount chainring for Brose ebike motors (both aluminium and magnesium models). Made of aluminium and available in 32T, 34T, 36T and 38T. Narrow-Wide teeth system to avoid chain drop out. Compatible with 9-10-11-12s chains (including Shimano 12s).
M15 allen bolts for Bosch Gen2 & Gen4 (Active, Performance, Performance CX), Brose and ISIS cranks. Autoextract system for cranks with 21mm threaded hole. Price per Pair of bolts.
This cranks from Prowheel are 6061T6 cold forged to be highly resistant to fatigue and high impact tensions. ISIS system for Brose motors. Left and right crank have different offset, like in Specialized ebikes (Levo, Kenevo, etc...). 165mm length.