Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Categories
Catalog
-
Brose S Alu motor C972 25km/h895,00 € 945,00 €
eBikes & Electric Kits There are 230 products.
39,90 €Cranks for ebikes with Shimano motor
This Prowheel cranks are made to be highly resistant to fatigue and high impact tensions. Compatible with ebikes with 24mm spindle Shimano motors. 165mm length.
39,90 €
41,95 €Sunrace 12 speed ebike chain 138 links
The Sunrace 12 speed chain is a narrow 12s chain for MTB ebikes. The Sunrace ebike chain has reinforced plates and pins. Teflon Coating Inner Plates. 138 links enough for bigger cassettes like 10-50. Instalation without tools. Compatible with SRAM Eagle.
41,95 €
49,95 €Pulleywheel for Haibike frames 12T
Pulleywheel for Haibike frames, made of steel, narrow-wide tooth, and 6902-2RS bearing. 12T.
49,95 €
11,90 €Yamaha PW-X lock ring for chainring
Yamaha PW-X lock ring for chainring. Replacement needed if you worn or damaged the original lock ring of your Yamaha PW-X electric motor.
11,90 €
from 7,50 €Shimano E8000 motor bearings
Shimano E8000 ebike motor bearings to repair any Shimano E8000 electric motor. See the photos and below description to see what reference you need. Select the bearing you need or "Full kit" for all (each option has a different price).
from 7,50 €
from 1,90 €Bosch 3 ebike motor bearings (BDU3XX)
Different bearing kits for Bosch Gen3 ebike motors (motor code with the format BDU3xx). With this bearings you can make the maintenance to your Bosch of 3th generation ebike motor. Select the bearing that you need or the Full Kit.
from 1,90 €
from 1,90 €Bosch Gen4 ebike motor bearings
Bearings for Bosch 4 ebike motors both normal and Smart System,(ie. the Performance Line CX). The Bosch Gen4 motors has motor code starting with BDU4 and the Gen4 Smart System starting with BDU37xx, BDU38xx,....). With this bearings you can make the maintenance to your Bosch of 4th generation ebike motor. Select the needed bearing or the Full Kit option.
from 1,90 €
from 29,90 €Brose speed sensor
Speed sensor for electric bikes with Brose motor. Includes speed sensor, cable, and connector, not the magnet of the wheel. Original Brose replacement. Wire length 42cm.
from 29,90 €
from 18,90 €Sealing for Brose drive (chainring side)
Gasket for the right cover (chainring side) of Brose C, S or T ebike motors (aluminum ones), or S MAG (Magnesium). With this Brose motor gasket you will be able to reseal the motor after doing maintenance. Price per unit.
Select your Brose motor model.
from 18,90 €
195,90 €Display Brose Allround
The Brose Allround Display for ebikes with Brose motors is practical and distinctive in design. The 1.5-inch color display is easy to read. The display can be installed on the right or left and is therefore the stylish all-in-one solution per excellence.
NOTE: you need the correct wire to connect this display with your Brose motor (not included).
NOTE: Not work with Specialized or BH bikes.
195,90 €
195,90 €Display Brose Remote
The Brose Remote for ebikes with Brose motors is practical and distinctive in design. The information in LEDs is easy to read, robust and spaceless. The display can be installed on the right or left and is therefore the stylish all-in-one solution per excellence.
NOTE: you need the correct wire to connect this display with your Brose motor (not included).
NOTE2: Not work with Specialized bikes.
195,90 €
119,90 €Impulse 2.0 ebike motor bearings
Bearings overhaul kit for Impulse 2.0 ebike motors. Contains the needed bearings to make the full maintenance to the main bearings of your Impulse 2.0 ebike motor.
119,90 €
24,95 €10V chain FORCE 138 links for ebikes
The 10 speed FORCE chain has been manufactured especifically for electric bikes (ebikes). The 10s Force chain has the links reinforced for not to suffer with the bigger forces of an ebike. 138 links.
24,95 €
4,95 €2 VBrake pads for ebikes
2pcs VBrake complete pads set. Pads compatible with all VBrake type bicycle brakes. Size and compound special for ebikes that need more brake power.
4,95 €
from 29,90 €Bosch Speed Sensor Slim (Gen 3 & 4)
"Slim" speed sensor for electric bikes with Bosch motor. Includes speed sensor with cable, and connector. Original Bosch replacement for generation 3 and 4 motors including Active, Performance and Performance CX.
Select the total length.
from 29,90 €
2,95 €Bosch slim speed sensor holder
Bosch slim speed sensor holder for ebikes with generation 3 and 4 Bosch motors and slim speed sensor.
2,95 €
from 9,90 €Magnet for Bosch slim sensor
Magnet for Bosch slim sensor of some generation 3 and 4 Bosch motors. Select the rear disc type where you are going to atach the magnet: centerlock or 6 bolts.
from 9,90 €
from 56,90 €FSA Cranks for ebikes with Brose - Specialized motors
This cranks from FSA are 6061T6 cold forged to be highly resistant to fatigue and high impact tensions. ISIS system for Brose motors. Left and right crank have different offset, like in Specialized ebikes (Levo, Kenevo, etc...).
from 56,90 €
19,95 €Bosch Kiox screen protector
Bosch Kiox screen protector made of transparent rubber (TPU). It protects all the top and lateral parts of the Bosch Kiox screen against scratches, dirt, rain,... allowing the normal use of the display and the buttons.
19,95 €
189,00 €SpeedBox 3.0 for Bosch
SpeedBox 3.0 tuning chip enables you to suppress the speed limiter on your electric bike. SpeedBox 3.0 is compatible with all Bosch (Active, Performance y Performance CX) electric bike motors, from 2nd generation to 4th generation (except Smart System).
189,00 €
124,90 €Impulse EVO & EVO RS ebike motor bearings
Bearings overhaul kit for Impulse EVO & EVO RS ebike motors. Contains the needed bearings to replace the main bearings of your Impulse EVO & EVO RS ebike motor.
124,90 €
104,90 €Bosch Gen1 bearings
Bearings kit for Bosch 1 ebike motors. The Bosch Classic was the first generation of Bosch ebike motors. With this bearings you can make the maintenance to your Bosch of 1st generation ebike motor.
104,90 €
from 18,90 €Left gasket for Brose (ECU side)
Gasket for the cover of Brose C, S or T ebike motors (aluminum ones), or the S MAG (Magnesium). With this Brose motor gasket you will be able to reseal the left part of the motor (electronics side) after doing maintenance. Price per unit.
Select the motor model.
from 18,90 €
8,50 €Bearing seal for Brose drive (chainring side)
Seal for the right bearing (chainring side) for all Brose ebike motors (Alu and Mag). This seal is extremely effective at stopping water and dirt entering the bearing and ultimately the motor.
8,50 €