Catalog
Viewed products
WolfTooth direct mount chainring for...
Crankshaft bearings kits for Yamaha PW-X, PW-X2 and Giant Syncdrive Pro ebike motors. Contains the needed bearings to make the maintenance to the main bearings of your Yahama ebike motor. Include 2 or 4 bearings, 1 seal and 2 o-rings.
NOTE: for motors made by Yamaha with ISIS crankshafts (not squared). For squared spindle go to PW & PW-SE product.
Bearings overhaul kit for Panasonic ebike motors. Contains the needed bearings to make the full maintenance to the main bearings of your Panasonic ebike motor.
Different bearings and bearings kits for Bosch 2 ebike motors (Active, Performance, Performance CX). With this bearings you can make the maintenance to your Bosch of 2nd generation (BDU2XX) ebike motor. See the description below and the photos to know each bearing reference.
In the "Bearing" field select the bearing you need.
Special Miranda chainring for bicycles with Bosch 2nd generation electric motor that need an offset chainring, for example, most boost bikes. One piece chainring with inner chainguard and outer chainguard. Available with 3mm, 5mm and 8,65mm offset.
Tool to tighten and loosen the chainring spider in Shimano engines. Valid for Shimano E8000, E7000 and E6100 ebike motors with a lockring diameter of 57mm or 54mm aprox. With this key you can make the maintenance of the Shimano electric motor.
Kiox screen kit compatible with all Bosch engines. Valid whether you've broken your current display and you need a replacement, or if you want to update your bike's display. It includes the display, remote control, holder and cable.
NOTE: Not valid for Smart System motors.
Kiox screen for Bosch engines. Valid whether you've lost or broken your current display and you need a replacement. It includes only the display.
NOTE: NOT FOR SMART SYSTEM MOTORS.
The 11 speed Shimano CNE8000 chain has been manufactured especifically for electric bikes (ebikes) with one chainring. The Shimano CNE8000 chain has the links reinforced for not to suffer with the bigger forces of an ebike. 138 links.
Genuine Brose belt repair kit to change a damaged belt. This kit include the original Brose belt, gasket, seals and instructions. The belt is made with the same compound of the new 2020 model, more robust than the original. Please, select the Brose motor model (S-T (Aluminium), or S Mag).
Brose belt tensioner for Brose motors. Original Brose part. Remember tighten the belt tensioner to only 0,2Nm (you can use our 0.2Nm torque tool).
This high quality cranks from Miranda are cold forged to be highly resistant to fatigue and high impact tensions. The Double Diamant finish combines a scratched surface with a frontal machined one that is smooth and shiny that gives a sophisticated and technical look.
Select "Model 2" for 2nd and 4th generation motors, ando "Model 3" for 3th generation motors.
Mudstop is a bearing protector for the main bearing of the Bosch Gen2 motors (Active, Performance, Performance CX up to 2019). Mudstop seal the space behind de chainring and prevents the entry of mud and water.
Bearing seal / protector for the right crank bearing of the Bosch Gen2 motors (Active, Performance, Performance CX up to 2019). Seal the space behind de crank and prevents the entry of mud and water.
The Galfer Disc Wave has been cutted by laser from the best steel alloy used, and a lot of holes provide a strong brake force, and a good heat dissipation. The Galfer Disc Wave have 2mm width. For 6 screw hubs. Available in 180mm, 203mm and 223mm.
The specific ebike Michelin tyre to practice Enduro with your 27.5 Plus ebike. The Michelin e-Wild give you all the grip with the GUM-X triple compound. Reinforced carcass with high protection against punctures and cuts. Front and rear have same pattern but different compounds. Available in 27.5x2.80.
Brose motor main pulley with the bearing races and sprag bearing (PLB20126 normal plastic cage) and big bearing (PLB20124) mounted. Preowned pulley in good condition, and new bearings.
Shimano STEPS E8000 screen protector made of transparent rubber (TPU). It protects all the top and lateral parts of the Shimano STEPS screen against scratches, dirt, rain,... allowing the normal use of the display and the buttons.
With this kit you can make the maintenance of your Bosch 4th generation (BDU4XX) motor. This rings, seals and the special grease protects the main Bosch engine bearing that next to the chainring. It is necessary to change it periodically while you make the grease maintenance of the area.
The WAG ULTRA eBike oil lubricates all mechanical joints even under the highest stress. Effective for extremely long periods and offers outstanding lubricating properties with metallic substrates. With spray brush for better application. 150ml spay.
This cranks are 6061T6 cold forged to be highly resistant to fatigue and high impact tensions. Mini ISIS system for Bosch 3 generation (motors with M10 crank bolts). 170mm.
MOLYKOTE PG-75 is a high quality German manufactured grease. Specifically designed for lubrication of plastics, rubbers and metal, like the gears found in many ebike motors. Suitable for long term lubrication. Select the format 30ml / 50ml / 150ml.
Brand new Brose S ebike motor (code C972...) factory limited to 25km/h. New Brose motor for that cases where is not posible a repair.
NOTE: Original Brose electronics, not include modifications made for some brands (i.e. Specialized,...), so some advanced features of this brands will not work.
Soudal silicone grease is a water repelent and high resistent to chemicals grease, that can be used for lubrication of metal, plastic and rubber parts. Soudal silicone grease do not damage rubber seals. This silicone paste also protects against rust and corrosion. 200ml.
This Prowheel cranks are made to be highly resistant to fatigue and high impact tensions. Compatible with ebikes with 24mm spindle Shimano motors. 165mm length.