Catalog
Connecting kit for disc brake hose. Necessary after shortening the hoses or replace them. Includes 2 pins and 2 olives.
Select the right model: Shimano, Avid/SRAM, Formula o Tektro.
Specially reinforced braided hose for hydraulic disc brakes. These metal hoses offer maximum resistance to the expansion, providing a more powerful braking with less effort. Includes the more common olives and accesories for assembly.
Magura Royal Blood oil for bike hidraulic disk brakes like Shimano, Magura,... Not compatible with DOT brakes like Avid, Formula,...
Fluid DOT 5.1 for hidraulic brakes (SRAM, Formula, Avid,...). MOTOREX BRAKE FLUID DOT 5.1 is a brake fluid for hydraulic brake and clutch systems with a boiling point of at least 260 °C and an extremely high wet boiling point of at least 180 °C. The low viscosity at low temperatures allow an easy bleeding procedure. 250ml.
With this SRAM bleed kit for disc brakes you can bleed and tune your X0 / XX / GUIDE / LEVEL / CODE / HYDROR / G2 hydraulic disc brakes. Essential also for when we want to shorten or change the hoses, or if our bike have internal wiring.
With this universal bleed kit for disc brakes you can bleed and tune your hydraulic disc brakes of any brand. Essential also for when we want to shorten or change the hoses, or if our bike have internal wiring. Compatible with Shimano, Magura, Formula, AVID and Hayes brakes.
Brake cable for bicycles of 1.5x2000mm and transversal head (the most used in MTBs). Made of stainless steel to avoid rust and have always a good feeling.
High quality brake outer casing with teflon. Black color. Price per meter.
XLC Connecting Kit for AVID disc brake hose. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
XLC Connecting Kit for Shimano disc brake hose. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
XLC Connecting Kit for XLC or Tektro disc brake hose. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
XLC Connecting Kit for Formula disc brake hose. Compatible with models with hex nut, not with SpeedLock system. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
XLC Connecting Kit for Hayes disc brake hose. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
XLC Connecting Kit for Magura MT disc brake hose. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
Cockpit Organizer are clips used to direct and group the bike cables. Each clip can capture up to 3 cables. Price for 4 units.
90° (front) or 135º (rear) tube cable guide replacement for V-brakes. With non-stick inner tube for smooth operation and without effort. Valid for all VBrake brakes. Price per unit.
Brake and shifter cable end caps for bicycles, to avoids frayed wires. Silver, blue, red or black color, price per 10 units.
Set of olive & pin (2.3mm) for connecting the hose to the Shimano brake lever and caliper disc brakes. Necessary to shorten the hoses or a complete change of hose.
With this piece you can comfortably bleed your Magura hydraulic brakes. One end of the nozzle is connected to the tube that goes to the syringe and the other is screwed on to the Magura brake caliper. 2 units are included.
DOT-4 fluid for hidraulic brakes (some Formula, Avid,...). This high performance DOT 4 brake fluid provides maximum functioning reliability even at high temperatures, high lubricant power and high chemical stability even under particularly heavy conditions. 250ml.
Black anodized aluminium hose guides to keep in place shifting and hose guides in the frame. Price per 2 guides.
Specially reinforced hose for hydraulic disc brakes. These hydraulic hoses offer maximum resistance to the expansion, providing a more powerful braking with less effort. Includes banjo ends. Green color. 3 meters.
Specially reinforced with kevlar hose for hydraulic disc brakes. These hoses offer maximum resistance to the expansion, providing a more powerful braking with less effort. Olives and accesories for assembly not included. 1,8m (only one brake). Black.