Catalog
With this SRAM bleed kit for disc brakes you can bleed and tune your X0 / XX / GUIDE / LEVEL / CODE / HYDROR / G2 hydraulic disc brakes. Essential also for when we want to shorten or change the hoses, or if our bike have internal wiring.
The XLC chain scrubber takes the hard work out of cleaning your bike chain. This tool is easy: simply fill with chain degreaser, clip on over your chain, and back pedal with your hand until your chain is clean. Essential for prolonging the life of your drivetrain. Includes brush and scraper to clean the cassette and chainrings.
Complete 18 function bike folding tool, with the most used bike sizes tools (allen, torx, screwdrivers, open wrench) and a chain tool. Ideal to solve any problem you have on route.
With this generic tool for bottom brackets and headsets, you can mount the pressfit bearings, bottom brackets and traditional or semi-integrated headsets in an easy way and without damaging the frame.
Torque wrench tool to apply the correct force to your bike screws. Adjustable from 2Nm to 24 Nm. 1/4 head. Allen and Torx bit sockets included.
This TekMax multitool has almost everything you need to solve any breakdown you have on your bike on route. Made of hardened CR-V steel. This bicycle multitool has a compact size (56x44x11mm) and very low weight, only 90gr.
Chain Checker tool to check the length of your bike chain. A wasted chain is longer, and produce shifting fails, and early sprockets waste.
Professional tool to extract cassettes of the main brands (Shimano, SRAM,...), remove center-lock disks, and to access to the internals of some Marzocchi forks.
Professional cable and housing cutter. Contains inner wire and outer casing reconditioner. Made of Cr-Mo steel.
Allen key set with the most common bike sizes: 2/2,5/3/4/5/6/8/10 mm. Made in Chrome-Vanadium (CR-V) alloy for maximum hardness.
Cleaning set XLC TO-S55, with scraper for cassette and chainrings and cleaning brush. It is important to remove dirt from cassette and chainrings to prevent premature wear.
Spokes tool for squared spoke heads of size 10/11/12/13/14/15. Ideal to center your wheels after a hard ride. Compatible with the most usual spokes heads.
Shimano TL-FC-20 chainring peg spanner, an invaluable tool for getting off stubborn chainring bolts.
XLC MP-P01 assembly paste for high-quality components such as carbon fiber, aluminum, titanium and stainless steel. The torque needed to not slip or move ir reduced by a 30%, avoiding damage to components. Essential for carbon fiber components where over-tightening breaks fibers destroying the component. Perfect protection against corrosion. 5g sachet.
Kengine DC01 Key to straighten bent or warped bike disks. Very useful to everyone with a bike with disk brakes.
With this universal bleed kit for disc brakes you can bleed and tune your hydraulic disc brakes of any brand. Essential also for when we want to shorten or change the hoses, or if our bike have internal wiring. Compatible with Shimano, Magura, Formula, AVID and Hayes brakes.
This XLC TO-S06 tool is meant to extract the Shimano Pressfit inner bearings and compatible (Ø 24mm inner diameter) again out the frame.The use of this tool in this process is strongly recommended in order not to cause damage to the frame.
Zefal Z-Box L bottle allows you to carry all sorts of things as tools, food or whatever you need. Large top cover to insert and remove things easily. It is waterproof and fits in any standard bottle cage. It can be divided into two, so it can be used as long 0'8l bottle or small 0'5l bottle.
This wrench 15 there will be no pedal that can resist you. With its long handle allows you to remove the pedals easily. Includes a 14 and 15 tube wrench for some cranks and hubs. A needed tool.
With this chain wrench you can remove the cassette sprockets from your bike comfortably. With this tool the cassette are fastened so it not turn , so you can release the central nut with cassete wrench.
Chain tool to open and close all kinds of bike chains. Its small format will allow you to take it in your backpack or bag of tools if you have a problem on route with your chain. Compatible with chains up to 12s.
Tool to remove the spider in Rotor cranks. With this key you can disassembly the spider to use Direct Mount (spiderless) chainrings, or Leo Rotor Spider to put type XX1 (76BCD) chainrings on your ROTOR REX1, REX2, 3D,... cranks.
Wrench to unscrew the inner tube of the cassette Leonardi General Lee of the hub body. Essential to be able to remove it when has tightened so much that it is not possible to remove it in the usual way.
Tool to remove the spider in Cannondale Hollowgram or Rotor BB30 cranks (REX1, REX2, 3D30, 3D+,...). With this tool you can disassembly the spider to mount Gecko spiderless chainrings or tighten the lockring on your Canondale Hollowgram or Rotor bb30 cranks.