Information

Tools There are 82 products.

per page
Showing 25 - 48 of 82 items
  • OPI Tool for Cannondale
    45,00 €
    OPI Tool for Cannondale

    Wrench for mounting and dismounting the OPI tube from stems / steerers OPI from Cannondale Lefty forks. With this tool you can tighten or loosen the OPI tube at the bottom.

    45,00 €
  • Assembly and extractor tool kit for BB30 bearings
    122,00 €
    Assembly and extractor tool kit for BB30 bearings

    Tool for extract and assemble bearings in BB30 bottom bracket. Its use is extremely easy and not requires of the use of hammer, so there is no risk of damage the frame or the bearings.

    122,00 €
  • Disassembly tool for BB30 pressfit bearings
    35,95 €
    Disassembly tool for BB30 pressfit bearings

    Tool for extract pressfit bearings in BB30 bottom bracket. Its use of this extractor is extremely easy and not requires of the use of hammer, so there is no risk of damage the frame or the bearings.

    35,95 €
  • Lock Ring Tool for Bosch chainring
    from  29,90 €
    Lock Ring Tool for Bosch chainring

    Tool to tighten and loosen the chainring in Bosch electric bike motors. With this key you can change the sprocket when worn or to adjust the gear ratio. Remember that Bosch closing thread going backwards than normal.

    from  29,90 €
  • Disassembly tool for BB90 pressfit bearings (Shimano and SRAM)
    47,95 €
    Disassembly tool for BB90 pressfit bearings (Shimano and SRAM)

    Tool for extract pressfit bearings in BB90 bottom brackets like Shimano or SRAM. This tool is valid for pressfit standards with 24mm or 22mm spindle, such BB86, BB92, SRAM Pressfit GXP. Its use of this extractor is extremely easy and not requires of the use of hammer, so there is no risk of damage the frame or the bearings.

    47,95 €
  • BB30 and PressFit 30 bearings mount tool
    42,95 €  47,95 € -11%
    BB30 and PressFit 30 bearings mount tool

    With this tool for BB30 and PressFit30 bearings, you can mount the BB30 and PressFit 30 bearings in bottom bracket in an easy way and without damaging the frame.

    42,95 €  47,95 € -11%
    Reduced price!
  • Fork seals assembly tool
    from  21,95 €  23,95 € -9%
    Fork seals assembly tool

    With this tool you can mount your new fork seals in your suspension fork easily and without damaging the seals or the fork. Available to install seals of 32mm, 34mm, 35mm / 36mm and 40 mm.

    from  21,95 €  23,95 € -9%
    Reduced price!
  • Shimano Pressfit BB mount tool
    39,95 €  44,95 € -12%
    Shimano Pressfit BB mount tool

    With this tool for Shimano PressFit bottom brackets, you can mount the bottom bracket in an easy way and without damaging the frame. Shimano code: TL-BB12.

    39,95 €  44,95 € -12%
    Reduced price!
  • Portable wheel centering tool
    27,95 €  29,95 € -7%
    Portable wheel centering tool

    This centering wheel tool allow center the wheels at any time. Placed in seconds of the fork legs or in the frame. Now you won't need to have a bulky and expensive tool at home to center your wheels.

    27,95 €  29,95 € -7%
    Reduced price!
  • Tool for dissasembly the OPI tube in Cannondale Lefty
    20,95 €
    Tool for dissasembly the OPI tube in Cannondale Lefty

    With this tool you can disassembly the OPI tube of a Cannondale Lefty fork. With this tool you can make the maintenance of the steerer bearings, change the stem or the spacers in a Cannondale Lefty fork.

    20,95 €
  • Mavic spokes tool
    5,95 €
    Mavic spokes tool

    Tool to tighten or loosen Mavic spoke heads to center wheels. This tool can be used with M7 and M9 Mavic spoke nozzles. Needed tool for everyone with Mavic wheels.

    5,95 €
  • Tool for Shimano Hollowtech bottom brackets
    11,90 €
    Tool for Shimano Hollowtech bottom brackets

    Tool for tighten or loosen the Shimano Hollowtech bottom brackets. With this tool you can make the maintenance of the bottom bracket, because includes the accesory for tighten the left crank cap.

    Valid too for centerlock discs with the lockring with external notches.

    11,90 €
  • Tool for Shimano bottom brackets
    10,95 €
    Tool for Shimano bottom brackets

    Tool for tighten or loosen Shimano classic bottom brackets (squared or Octalink). With this tool you can make the maintenance or replace the bottom bracket.

    10,95 €
  • Crank extractor for Bosch, ISIS, Octalink and squared
    19,95 €
    Crank extractor for Bosch, ISIS, Octalink and squared

    Crank extractor for Bosch, ISIS, Octalink and squared bottom brackets. With this crank extractor you can disassembly the cranks easily without damage.

    19,95 €
  • Cranks extractor for ISIS, Octalink and squared bottom brackets
    8,95 €
    Cranks extractor for ISIS, Octalink and squared bottom brackets

    Cranks extractor for ISIS, Octalink and squared bottom brackets. Essential tool for removing all kinds of cranks on easily without damage.

    8,95 €
  • Tool for disassembly the spider in Rotor 24mm axle cranks
    34,90 €
    Tool for disassembly the spider in Rotor 24mm axle cranks

    Tool to remove the spider in Rotor cranks with 24mm axle. With this key you can disassembly the spider on your ROTOR REX3, 3D24,... cranks. For 10 indents lockrings (not 12).

    34,90 €
  • Hub cone spanner tool
    2,50 €
    Hub cone spanner tool

    The hub cone spanner tool is a must have for all the people with traditional ball hubs (like all the Shimano hubs). The cone and balls wear makes that from time to time you need to tighten the hubs. With this tool you can tighten or loose cones of 13, 14, 15 and 16. You will need to have 2 of this tools to make the maintenance properly. Price per unit.

    2,50 €
  • Lock Ring Tool for Brose chainring spider
    24,90 €
    Lock Ring Tool for Brose chainring spider

    Tool to tighten and loosen the chainring spider in Brose engines, like in the Specilized Turbo Levo. With this key you can make the maintenance of the Brose electric motor.

    24,90 €
  • Carbocut hacksaw blade to cut carbon fiber
    9,95 €  10,50 € -6%
    Carbocut hacksaw blade to cut carbon fiber

    Carbocut is a revolutionary hacksaw specifically designed for the bicycle world – it’s the best possible tool you can have for cutting hard materials (ceramics, steel, titanium...) and it simply shines when it comes to working with composite tubes and parts. Size: 24,8cm between holes. Price per blade.

    9,95 €  10,50 € -6%
    Reduced price!
  • Tool to change shock bushings
    22,95 €
    Tool to change shock bushings

    Tool to change shock bushings for Rock Shox, FOX, Marzocchi,... and any other that have 0,5"x0,5" (12,7x12,7mm) bushings. The bushings of the shocks must be changed when you see some looseness.

    22,95 €
  • BB30, Pressfit30, BB386 bottom bracket extractor
    34,90 €  36,90 € -6%
    BB30, Pressfit30, BB386 bottom bracket extractor

    This XLC TO-S06 tool is meant to extract the BB30, Pressfit30, BB386 inner bearings and cups (Ø 30mm inner diameter) from the frame. The use of this tool in this process is strongly recommended in order not to cause damage to the frame.

    34,90 €  36,90 € -6%
    Reduced price!
  • Multitool XLC TO-M20
    17,95 €  19,95 € -11%
    Multitool XLC TO-M20

    The XLC TO-M20 multitool has almost everything you need to solve any breakdown you have on your bike on route. Made of hardened steel with nickel-plated anticorrosive coating. This bicycle multitool has a compact size and low weight.

    17,95 €  19,95 € -11%
    Reduced price!
  • Pliers to open the fast links in chains
    11,95 €
    Pliers to open an close the fast links in chains

    With these pliers you can change the chain quickly. These pliers allow you to open and then close the quick-closing links of SRAM or KMC chains for example.

    11,95 €
  • SRAM XX1, X01 y GX rear derailleur adjust tool
    5,95 €
    SRAM XX1, X01 y GX rear derailleur adjust tool

    With this tool you can adjust easily the space between the jockey puller and the cassette for SRAM XX1, X01 and GX rear derailleurs.

    5,95 €
Showing 25 - 48 of 82 items
We use our own and third-party cookies to improve our services by analyzing your browsing habits. Consult our policy of use of cookies.
» Accept cookiesDon't accept