Catalog
Ahead aluminum cap for bicycles with 1 1/8 stem. Includes cap, screw, and spider. Orange color.
The Madison Y04 Youth saddle is a saddle especially resistant. Sides in Kevlar and central area in high strength material. Good padding in multi-density foam. Dimensions: 130 mm x 240 mm. Approx weight: 290 g.
XLC Pro Ride stem is a Direct Mount type stem for RockShox Boxxer type suspension forks and compatible. Direct anchoring by 4 screws and the wide cap give greater precision handling. For 31.8 mm handlebars, has 50mm in length and 15° angle. Black colour. Weight 150 gr.
Stem for bicycles with 1 1/8 ahead steerer. The 35 ° angle of the stem provide a comfortable position and greater control. 4 screws cap for a firm handlebar atachment. Available in different lengths and 25.4 or 31.8 mm handlebar Black colour.
Specific XLC FR03 stem for Enduro, Freeride and DH. Has a length of 40mm for greater control of the direction and a more suitable position for these disciplines. Fully mechanized in CNC for greater robustness. 1 1/8" steerer tube and 31,8mm handlebar. Black colour.
The XLC Pro SL ahead stem is very lightweight and rugged for MTB. Fully mechanized in CNC from a block of aluminum. For 1 1/8 '' steerer tube and 31.8mm handlebar. Available in various lengths. Angle of 5°. Black anodized. Weight 121gr in 70 mm.
Handlebar extension in aluminum for triathlon or road bike. Valid for all handlebar diameters, from 25.4 to 31.8 mm. Wide padded both in the area of grip as in the elbows. Position of the elbows adjustable.
Pair of armrest replacement for the XLC handlebar extension for Triathlon bikes or time trial road bikes. Valid also for any extension with tubes of 25.4-26.0mm. Ample padding for extra comfort.
The 40mm XLC Pro Ride stem for mountain bikes is especially focused on specialties such as enduro and freeride. It is especially robust and adds the needed rigidity to the handlebar. For 1 1/8" steerers, and 31.8 mm handlebars. Weight: 250 gr.
The XLC SA-S05 saddle has a narrow profile with 275x135mm measures. Has a padded moderate that it makes comfortable, and antiprostatic hole to relieve the pressure of the sensitive areas. Color black / white. Weight 310 g.
The carbon fiber flat handlebar Leonardi Factory Drake is hand made in Italy. Leonardi has found the balance between the carbon flex, resistance, and price, obtaining a handlebar light, hard and with ability to absorb irregularities and avoid that they bind you arms. Weight of just 150 grams and 740mm wide. Mate 12K and specific grip area finish.
Set of 2 long foam grips of 400mm each. For 19-22mm diameter handlebars. Ideal for multifunctional handlebar. This foam grips will make your handlebar more comfortable.
With this ZOOM adapter is able to mount an ahead stem at a fork with threaded direction. Compatible with steerer tubes of 22,2mm, usually 1 inch threaded steerers.
The carbon fiber rise handlebar Leonardi Factory Snake is hand made in Italy. Leonardi has found the balance between the carbon flex and resistance, obtaining a handlebar light, hard and with ability to absorb irregularities and avoid that they bind you arms. Weight of just 135 grams and 740mm wide.
Carbon fiber handlebar suitable for All Mountain and Enduro. Load tested with over 500kgs! Made with carbon fiber and glass fiber reinforcement. Available with 10mm or 25mm rise. Width of 760mm for a better control over your bike.
The Leonardi Naghi carbon fiber frame is between the world lightest suspension frames with its 1650gr. All this without losing the necessary stiffness for a competition frame.
This carbon frame for 27.5 inch wheels has been manufactured in Taiwan by one of the best manufacturers. Use both tapered direction, as 142x12mm thru-axle for the rear wheel for greater rigidity.
These gel pads are placed below the road handlebar tape to increase comfort. Come 4 gel pads to put in the bottom 2 and other 2 in the upper part of the handlebar. Very useful in gravel bikes.
With this gel saddle cover, you will not suffer that hard saddle anymore. This seat cover has a central hole to prevent pressure in sensitive areas. It is not very wide, so it adapts perfectly to MTB and road sports saddles. With drawstring for a perfect fit.
The Woman saddle XLC A02 Titanium is a competition high end MTB seat. It convinces with its striking look and great technological features. The ArcTech seat base construction optimizes the flex movement between bicycle and seat. Moreover, it provides high comfort and ergonomics. The elegant vinyl seat cover and the aluminum-titanium saddle carriage complete the uncompromising features.
Integrated aheadset for 1 1/8" - 1 1/4" tapered bike frames. Made in aluminium with premium sealed bearings for better durability. TOKEN Omega A-Serie SHIS: IS42/28,6 | IS47/33.
The Leonardi Factory BO Superlight carbon seatpost is hand made in Italy with full carbon T800 HM head and tube. 400mm tube seatpost, cut to personal taste. The Leonardi BO Superlight seatpost is adjustable with 2 screws. Very light: 170gr (31.6 and 40cm).
Straight and short bar ends for MTB handlebars to allow a better position of the hands when climbing. Bar ends made by Kalloy UNO in aluminium. Mate black color.
Aluminium washers to avoid direct contact between screws and pieces. Made in aluminium to avoid add weight to your bike. Available with 6mm / 8mm / 12mm internal diameter, and 1mm width. Price per 10 washers.