Catalog
The XLC Raceby is a lightweight carbon seatpost designed for road, cross-country and marathon use. A durable aluminium head offers more safety in the saddle clamping area. The Raceby is available in 40cm lengths and 27,2mm / 31.6mm diameters.
With the Titanium Lowde screws you can lighten your bike without losing resistance. Titanium is strong like steel, does not rust, and weighs about half that of steel. They are ideal for the stem, seat post, brake and shift levers, etc. Cone head. Price per unit.
Integrated steerer sealed bearing for the Cannondale Lefty forks. Bearing size: 39,7x50,8x7mm.
Price per unit.
With this OPI Tube for Cannondale Lefty you can use Cannondale OPI type stems. This OPI tube is available in different lengths, so you need to measure your OPI tube. See the length in the base of your tube.
S-M: 97mm, L: 109.7mm, XL: 122.4mm, XXL (Standard): 134.4mm
Plastic 4mm gear outer casing caps. Black color. 10 units.
XLC SP-T12B height adjustable seatpost for enduro and all mountain bikes. Increase or decrease the saddle height while ride to tackle a tricky downhill. With remote control for the handlebar.
The Thomson Topflat Carbon handlebar is a carbon fiber bar for the Mountain Bike enthusiast. A flat bar made with Toray carbon fiber and tailor-made Nano Epoxy Resin for (extremely) high impact resistance. This helps to allocate stiffness and flex where needed. 800mm wide and 35mm diameter.
The Thomson Topflat Alu handlebar is a 800mm wide handlebar for the Enduro enthusiast. A flat bar made with aluminium for high impact resistance. 800mm wide and 35mm diameter.
This Titanium bolt for stem cap is as strong as steel but a lot lighter. Forget aluminium bolts that round easily. The titanium mix the best of steel and aluminium. M6x40mm cilindrical head.
50mm XLC Stem for the new 35mm diameter handlebars. Made in 6061 aluminium and 3D forged, is a robust stem ideal for Enduro bikes. Weight: 146gr.
Derailleur hangers for most of the Specialized frames. Select "Model A" or "Model B" based in the model of your bike (see the list below).
Derailleur hanger for Cannondale Scalpel SI from 2017 to 2020. Designed by Leonardi to be more robust than the original.
Fouriers DX002 aluminium ahead cap anodized in different colors: purple, green, orange, red. Included screw and spacer in the same color. Price per unit.
Select the desired color.
The saddle TKX Korell is a sports saddle with high-density PU padding and central hole to provide greater comfort. Very aerodinamic design. Greater lightness and absorption with titanium rails. Dimensions: 257x140mm. Weight: 250 gr.
Headset expansor designed to safely and securely compress your headset. Very important use an expansor when using a fork with a carbon fiber steerer tube. Valid for aluminium or steel tubes too. 52mm length.
Aheadset designed to allow installation of tapered forks (1 1/8" - 1.5") in 1.56'' Cannondale frames. For example you can install the new Lefty Ocho fork, or any new FOX or Rock Shox on any Cannondale frame with a 51mm headset.
The Tioga headset carbon cap is designed to safely and securely compress your headset. Include spider compatible with aluminium or steel tubes. Carbon top cap.
The saddle Tioga MC Lite R is a sports saddle with high-density PU padding. Very aerodinamic design. Greater lightness and absorption with titanium rails. For experienced riders that preffer performance over comfort. Dimensions: 275x133mm. Weight: 193 gr.
This transparent frame protector made by 3M avoid the damage in your frame with the small stones that throw the wheel. Fully transfarent, allows to be cut. With one unit you can protect the main places of your frame. 250x6cm.
Derailleur hanger for Cannondale Scalpel SI 2021. Designed by Leonardi to be more robust than the original (K33001).
The Tioga UltraSlim grips are a very slim grips to have all the feeling of the bike, even with gloves. Very thin but with aggressive relieve to have the best grip. 120mm width, black color.
Small bell of only 23mm diameter, with elastic fixings for any size handlebar (from 19mm to 31.8mm). 19gr only.
FORCE stem with a short length of 45mm for greater control of the direction and a more suitable position. For 1' 1/8" steerer tube and 31,8mm handlebar. Black colour.
Integrated aheadset for 1 1/8" - 1.5" tapered bike frames. Made in aluminium with sealed bearings for better durability. SHIS: IS42/28,6 | IS52/40. View detailed information below.