This cranks are 6061T6 cold forged to be highly resistant to fatigue and high impact tensions. Mini ISIS system for Bosch 3 generation (motors with M10 crank bolts). 170mm.
Cannondale Lefty OCHO needle bearings kit to repair your fork. If you have the bearings of your Cannondale Lefty 8 wasted or damaged you can replace them with this needle bearings kit.
Bosch aluminium lock ring for chainring. Replacement needed if you worn or damaged the original lock ring of your Bosch electric motor.
- Model 1: Old Classic+.
- Model 2: For Active, Performance, Performance CX (BDU2xx).
- Model 3: For Active Line and Active Line Plus (BDU3xx).
- Model 4: For 4 generation (BDU4xx).
- Model B: Same as Model 2 (BDU2xx) but for chainrings with offset.
With this tubeless rim tape you can seal your rim. Available for 26, 27.5 and 29 inches. Made of a hard but elastic plastic, remains very tense, sealing the wheel. For presta valve, but easily adaptable to moto valve.
Bafang M410, M420, M500, M510, M600, M560, M800 y M820 motor wire divisor to connect speed sensor and rear lights. From 8 pins to 4+2 pins (view photos of the connectors). CAN-Bus type. (EB 1T2.N)
Bosch logo round cover replacement for Bosch bicycle motors. Valid for Bosch Active, Performance and Performance CX models. Diameter: 7cm.
The XLC Saturn gloves has short fingers and the upper face is made of very breathable mesh. Thumb finger in towel and the palm in resistant and cushioned Serino.
Full Alligator banjo kit for disc brakes of the main brands: Avid, SRAM, Shimano, Hayes and Magura (without MT series). Made of Steel. Included the banjo, nut, olive, seals and bolt.
2 detachable DTSwiss tubeless presta valves with caps and nuts. Very light, 6gr each valve. Available in 80mm length. Minimun insert of 55mm. Cap can be used as a wrench to open and close the valve core.
High quality bike brake outer casing with teflon. White color. Price per 2 meters.
Set of 2 disc brake pads for bicycles for brake models Shimano Deore M575, M525, M515, M495, M486, M485, M475, M466, M465, M447, M446, M445, M416, M415, M395 and M375, Nexave C501, C601 and C607, RST D-power, Tektro Aquila, Draco, Auriga, Gemini, Orion, Dorado and HDC, TRP Hylex, HYRD and Spyre and Giant MPH Root. Semimetallic compound.
Rear derailleur pulley for SRAM XX1 and X01 of 11 and 12 speed derailleurs. Compatible with GX with an aditional kit (not included). Made of anodized aluminium in color yellow, orange, blue, red, green, purple, silver, titanium and black. With ball bearings for easy shifting.
Bafang M300 white plastic gear assembly for ebike motors. Includes the white nylon gear, the center steel spindle and the bearings, all ready to be mounted.
The 10 speed FORCE chain has been manufactured especifically for electric bikes (ebikes). The 10s Force chain has the links reinforced for not to suffer with the bigger forces of an ebike. 138 links.
Full brake lever for Magura MT Sport (new MT2), with Carbotecture lever for 2 fingers in black color. The necessary spare in case you broke your brake lever Magura MT2 in a fall. The Magura MT Sport lever can be used both in left or right side of the handlebar (front or rear brake).
Liqui-Moly liquid hand cleaning paste for thorough and gentle hand cleaning. Even removes stubborn soiling such as paint, oil and brake dust. Gentle on the skin and sparing in consumption. Dermatological tested. Thoroughly rub into dry hands and rinse off. 500ml.
11 Teeth aluminium jockey wheel for all Shimano 9, 10 and 11s groups. Ceramic sealed bearings for the best rolling efficiency. 1 jockey wheel.
The X-ONE is a bottle cage made of reinforced plastic. Hold bottles well in all conditions and any application. Very light.
Spoke head washers for a better fit in the hub and avoid spoke clearances, creaks and breaks. For 1.8mm and 2.0mm spokes. 36 washers.
Fluid DOT 5.1 for hidraulic brakes (SRAM, Formula, Avid,...). MOTOREX BRAKE FLUID DOT 5.1 is a brake fluid for hydraulic brake and clutch systems with a boiling point of at least 260 °C and an extremely high wet boiling point of at least 180 °C. The low viscosity at low temperatures allow an easy bleeding procedure. 250ml.
Front wheel of great quality with sealed bearings hub for 15mm thru axle, and 6 holes disc. Rigid DT Swiss rim tubeless ready, 32 spokes and presta valve. Internal width of 19mm ideal for XC.
Red rear light with laser function that draw 2 red lines in the floor to be more visible and to show the width of the biker. Led and laser are independent with 2 butons. Both can be configured as steady, flashing or off. 2xAAA batteries included.
Side wheels for children's bicycles. Very robust and stable thanks to his arm diagonally (not in L as others that bend or flex), which gives a lot of security for children to learn to ride a bike. Easily adjustable for wheels from 350 to 500mm (14 to 20 inches). Price for the pair of wheels.
Remote control for Kiox display for Bosch ebikes. Valid when you've broken your current Bosch remote control and you need an original Bosch replacement.
Saddle bag with enough space to carry a 29 inches MTB tube and a small multitool. This saddle bag offers a perfect adjust to the saddle with the clip system.
XLC Ahead aluminium spacer set. For 1' 1/8". Color orange. The set include the next sizes: 3 x 5mm, 1 x 10mm, 1 x 15mm.
Inside torque sensor ring for Brose motors. Valid for all Brose ebike motors (both aluminium and magnesium).
NOTE: Male version (with pins).
Aluminium washers to avoid direct contact between screws and pieces. Made in aluminium to avoid add weight to your bike. Available with 6mm / 8mm / 12mm internal diameter, and 1mm width. Price per 10 washers.
Stainless steel 5mm brake outer casing caps. Available in anodized colors: red, gold, green, silver, blue, black. Price per unit.
Ergotec aluminium bike seatpost. 31,6mm tube diameter and 400mm length. Mate silver color. Weight: 370gr.
Carbon fiber bike aheadset spacer. 1 inch or 1" 1/8 diameter. Available in multiple heights. Price per unit.
Internal diameter:
Tool to straighten bent or warped bike disks. Very useful to everyone with a bike with disc brakes.
Tranz-X height adjustable seatpost for gravel and mountain bikes. Increase or decrease the saddle height while ride to tackle a tricky downhill. With remote control for the handlebar. Internal cable routing.
Bearings overhaul kit for Impulse 2.0 ebike motors. Contains the needed bearings to make the full maintenance to the main bearings of your Impulse 2.0 ebike motor.
Allen key set with the most common bike sizes: 2/2,5/3/4/5/6/8 mm. Made in Chrome-Vanadium (CR-V) alloy for maximum hardness.
e*Thirteen direct mount chainring for Shimano EP8 / E8000 / E7000 ebike motors. Made of aluminium and available in 32T and 34T. Narrow-Wide teeth system to avoid chain drop out.