Brose belt tensioner for Brose motors. Original Brose part. Remember tighten the belt tensioner to only 0,2Nm (you can use our 0.2Nm torque tool).
Brose lock ring for chainring. Replacement needed if you worn or damaged the original lock ring of your Brose ebike electric motor.
Brose motor main pulley with the bearing races and sprag bearing (PLB20126 normal plastic cage) and big bearing (PLB20124) mounted. Preowned pulley in good condition, and new bearings.
Brose 4+1 pins motor wire to connect HIGO type displays. Compartible to the Marquardt JD3 and to ZEG Bikes from 2018, and the new style Brose All round Display. 1300 mm long.
We have a similar wire but with 5 pins.
Brose motor wire to connect HIGO type displays. Compartible to the Marquardt JD3 and to ZEG Bikes from 2018, and the new style Brose All round Display. 1300 mm long.
The motor conector has 5 pins with the 5 wires connected. We have other version with the motor conector with 4 pins & wires conected, and an independent wire (4+1).
Brose planetary gear assy replacement, that include the 3 nylon gears, central spindle and asociated bearings, like in the photo. Valid for both aluminiun and magnesium model. Remember use Molykote plastic grease for this plastic gears. Good condition parts extracted from used motor.
Brand new Brose S ebike motor (code C972...) factory limited to 25km/h. New Brose motor for that cases where is not posible a repair.
NOTE: Original Brose electronics, not include modifications made for some brands (i.e. Specialized,...), so some advanced features of this brands will not work.
Speed sensor for electric bikes with Brose motor. Includes speed sensor, cable, and connector, not the magnet of the wheel. Original Brose replacement. Wire length 42cm.
Crankshaft for Brose motors (C, S, T and S-Mag). If the shaft of your Brose motor is already very worn in the area of the needle bearing, it has been bent or damaged for some reason, it is time to change it for a new one.
The Brose Allround Display for ebikes with Brose motors is practical and distinctive in design. The 1.5-inch color display is easy to read. The display can be installed on the right or left and is therefore the stylish all-in-one solution per excellence.
NOTE: you need the correct wire to connect this display with your Brose motor (not included).
NOTE: Not work with Specialized or BH bikes.
The Brose Remote for ebikes with Brose motors is practical and distinctive in design. The information in LEDs is easy to read, robust and spaceless. The display can be installed on the right or left and is therefore the stylish all-in-one solution per excellence.
NOTE: you need the correct wire to connect this display with your Brose motor (not included).
NOTE2: Not work with Specialized bikes.
Genuine Brose belt repair kit to change a damaged belt. This kit include the original Brose belt, gasket, seals and instructions. The belt is made with the same compound of the new 2020 model, more robust than the original. Please, select the Brose motor model (S-T (Aluminium), or S Mag).
Gasket for the right cover (chainring side) of Brose C, S or T ebike motors (aluminum ones), or S MAG (Magnesium). With this Brose motor gasket you will be able to reseal the motor after doing maintenance. Price per unit.
Select your Brose motor model.