Catalog
Muc-Off HCB-1 is the ultimate corrosion protection spray for your ride and is effective even in the harshest of conditions. Suitable for bicycles, e-bikes, motorcycles and powersports. HCB-1 is safe to use on electrical components, paintwork and most rigid plastic trim. Dissolves existing rust and creates a self-healing barrier, active for up to 12 months.
Tool for tighten or loosen the Shimano Hollowtech II bottom brackets. With this tool you can make the maintenance of the bottom bracket. It can be uset to tighten some centerlock discs, and as extension for other tools.
Muc-Off Glue & Sealant Remover with a non-aggressive proprietary formula, helps remove rim tape glue, sealant or tubular glue residue from inside rims (and many other surfaces) prior to applying a new Tubeless Rim Tape or just switching up your decals. Safe to use on most metal, plastic and carbon fibre surfaces. 200ml spray.
Tool to change shock bushings for Rock Shox, FOX, Marzocchi, Suntour... and any other that have 12,7 or 12mm bushings. The bushings of the shocks must be changed when you see some looseness.
XLC S28 Chain tool to open and close all kinds of bike chains, including the last 11 speed and 12 speed chains. Its small format will allow you to take it in your backpack or bag of tools if you have a problem on route with your chain.
The Lifu chain scrubber takes the hard work out of cleaning your bike chain. Simply fill with chain degreaser, clip on over your chain, and back pedal with your hand until your chain is clean. Essential for prolonging the life of your drivetrain.
Cleaning set with scraper for cassette and chainrings and 3 cleaning brushes. It is important to remove dirt from cassette and chainrings to prevent premature wear.
Torx tool set with the most common bike sizes: T10, T15, T20, T25, T27, T30, T40. Made in Chrome-Vanadium (CR-V) alloy for maximum hardness.
Torque wrench calibrated to 0.2Nm of torque. Allows use of 1/4 inch bits with C 6.3 or E 6.3 shank. With magnet for the correct attachment of the tips.
The value of 0.2Nm of torque is fixed, it cannot be adjusted.
Velox's E-bike Silicone Grease is insoluble in water and is ideal for protection against stream and toxic water environments. It's perfect for E-bikes because it insulates against electricity (dielectric grease) and allows lubrication in all climate conditions and over a range of temperatures between -50c and 220c.
M-Wave torque wrench for tightening from 3Nm to 10 Nm. Very cheap thanks to its simple system that shows you how much you are tightening by bending. Simple but very practical for use on the bike.
Arexons Ferox is a rust neutralizer for the maintenance of structures, plants, machines, vehicles etc. Arexons Ferox neutralises rust, it combines with the oxide and the metal to form an inert black, protective coating, which prevents further corrosion.
Tool for loosening or tightening the top caps of the SR Suntour fork legs. Available in two diameters depending on the fork model (24mm-10 notches or 29mm-12 notches).
Kroon Compound OGL is used as a lubricant for heavy-duty open gears and chains. Compound OGL is a special compound formulated from highly refined mineral base oils with solvents. It is supplemented with special Bitumen 'Extreme Pressure' and wear-reducing molybdenum additives. Excellent penetrative ability, adhesion to metals and water-resistance.
Complete 14 function bike folding tool, with the most used bike sizes tools (allen, torx, screwdrivers, brake pad opener, tire lever,...). Ideal to solve any problem you have on route. The SKS TOM 14 in made of high quality chrome-vanadium steel. Very compact, weights only 129gr.
Fluid DOT 5.1 for hidraulic brakes (SRAM, Formula, Avid,...). BikeWorkx DOT 5.1 is a brake fluid for hydraulic brake and clutch systems with a boiling point of at least 260 °C and an extremely high wet boiling point of at least 180 °C. The low viscosity at low temperatures allow an easy bleeding procedure. 100ml.
The XLC M05 is one of the most complete 19 function bike folding tool, with the most used bike sizes tools (allen, torx, screwdrivers, wrenchs) and a chain tool. Ideal to solve any problem you have on route.
Yamaha Multemp AC-N is a high quality Japanese manufactured grease by KYODO YUSHI. Specifically designed for lubrication of metal and plastics, like the gears found in many ebike motors. Suitable for long term lubrication. 50ml.
Hylomar H is a highly engineered, non-setting and non-hardening jointing compound. The compound is resistant to a wide range of fluids. It can be used to seal motors, including ebike motors.
Pipe cutter to cut cleanly aluminium parts like fork tube or seatpost. Max. diameter: 30mm.
Headset spanner to adjust threaded headsets or big nuts of 30mm / 32mm / 36mm y 40mm.
Box of 100pcs (50 pairs) of nitrile gloves. The nitrile gloves are ideal to work with greases and dirt, like in your garage repairing a bike.
Shimano BBR60 bottom bracket extractor. With this tool you can install and remove SM-BBR60 bottom brackets. You need a 1/2 tool to use it. Similar to TL-FC37.
Protexa hand cleaning paste for thorough and gentle hand cleaning. The microparticles even removes stubborn soiling such as paint, oil and brake dust. Gentle on the skin and sparing in consumption. Dermatological tested. Thoroughly rub into dry hands and rinse off. 500gr.