Catalog
With this tool for BB30 and PressFit30 bearings, you can mount the BB30 and PressFit 30 bearings in bottom bracket in an easy way and without damaging the frame.
With this tool you can mount your new fork seals in your suspension fork easily and without damaging the seals or the fork. Available to install seals of 32mm, 34mm, 35mm / 36mm and 40 mm.
Lithium grease grade II for great protection against wear and corrosion. High adhesion and water resistance to keep parts of your bike ready for longer. Ideal for any part of the bike. 125ml.
With Giyo AirTank tubeless pump you can inflate normal wheels or tubeless. To inflate tubeless tyres you must pump air with the valve closed, in such a way that air accumulates until 240PSI. Once filled, open the valve and inflate blow your tubeless.
With this tool for Shimano PressFit bottom brackets, you can mount the bottom bracket in an easy way and without damaging the frame. Shimano code: TL-BB12.
With this digital scale you can weigh your bike with precision. Tie support and hook in rubbered steel to not damage the surfaces and not break. Precision of + - 10gr.
Spray lubricant for suspension forks. Brunox Rock Shox Deo is formulated to ensure that your fork work smoothly giving you better touch, and taking care of your seals. 100ml spray.
This centering wheel tool allow center the wheels at any time. Placed in seconds of the fork legs or in the frame. Now you won't need to have a bulky and expensive tool at home to center your wheels.
Long-term grease for bicycles (FETT 2000). Motorex Bike Grease 2000 is a fluorescentyellow calcium-based grease with durable lubricating properties. MOTOREX BIKE GREASE 2000 is a highly water-repellent, extremely pressure-resistant grease. Provides enhanced resistance to oxidation and aging. Ideal for lubricating bearings, hubs, joints and headset. Carbon tested.
With this tool you can disassembly the OPI tube of a Cannondale Lefty fork. With this tool you can make the maintenance of the steerer bearings, change the stem or the spacers in a Cannondale Lefty fork.
Tool to tighten or loosen Mavic spoke heads to center wheels. This tool can be used with M7 and M9 Mavic spoke nozzles. Needed tool for everyone with Mavic wheels.
Tool for tighten or loosen the Shimano Hollowtech bottom brackets. With this tool you can make the maintenance of the bottom bracket, because includes the accesory for tighten the left crank cap.
Valid too for centerlock discs with the lockring with external notches.
Tool for tighten or loosen Shimano classic bottom brackets (squared or Octalink). With this tool you can make the maintenance or replace the bottom bracket.
The XLC chain scrubber takes the hard work out of cleaning your bike chain. This tool is easy: simply fill with chain degreaser, clip on over your chain, and back pedal with your hand until your chain is clean. Essential for prolonging the life of your drivetrain. Includes brush and scraper to clean the cassette and chainrings.
With this tubeless rim tape you can seal your rim. Available for 26, 27.5 and 29 inches. Made of a hard but elastic plastic, remains very tense, sealing the wheel. For presta valve, but easily adaptable to moto valve.
Crank extractor for Bosch, ISIS, Octalink and squared bottom brackets. With this crank extractor you can disassembly the cranks easily without damage.
Cranks extractor for ISIS, Octalink and squared bottom brackets. Essential tool for removing all kinds of cranks on easily without damage.
Smuums transmission bike cleaner / degreaser let's you clean all the parts of the bike transmission (chain, casette, chainrings,...). It also respect all parts of the bike (frame, disks and brake pads, suspensions ...).
Tool to remove the spider in Rotor cranks with 24mm axle. With this key you can disassembly the spider on your ROTOR REX3, 3D24,... cranks. For 10 indents lockrings (not 12).
The hub cone spanner tool is a must have for all the people with traditional ball hubs (like all the Shimano hubs). The cone and balls wear makes that from time to time you need to tighten the hubs. With this tool you can tighten or loose cones of 13, 14, 15 and 16. You will need to have 2 of this tools to make the maintenance properly. Price per unit.
Red grease with teflon (PTFE 1100) for a long lasting lubrication for all the bicycle components. Everybody need to have one in the house or in the garage. 60gr or 500gr.
Kroon TEFTEC is a chain oil ideal for winter, rain days and mud, or long routes where we need a long lasting lubrication. With high quantity of Teflon (PTFE) to reduce the friction between the chain parts. 100ml.
Bag of 30 assorted patches with the most used sizes: 12 of 18mm, 12 of 24mm, and 6 of 27mm. Bike patches made by Bompar in Spain, to use with usual vulcanization glue (not included).
Forget punctures and blowouts. JOE'S puncture sealant for tubeless, tubeless ready and tubular tires, seal the tire instantly while you ride. Excellent sealing for holes up to 6mm.